[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 3 Jan 2001, at 14:55, Fuhriman, Mark wrote: > I have found a local source for the cyl head temp sensor - Bosch > 0 280 130 003 for my "B" brain, right? Right 003 = VW 311 906 041 (long wire for 68-9) 012 = VW 311 906 041A (short wire for top mount) There is no difference other than wire length. The late one may not be available since the early one makes a good universal replacement. > And Jim, on my '69 the cyl head temp sensor is mounted on top of the > head by the #4 spark plug. Good, this is best. > The #1 and #2 injectors are grounded to the top of the case, but > the #3 and #4 are grounded on the tin by the #4 plug. A strange > arrangement. And on that #3/#4 ground, there *is* a spring washer > in there, and it is holding tight. The usual metric wavy washer isn't enough. I assume someone added a ground wire extension to the 1/2 side. It would be a good idea to just do the same thing for the 3/4 side. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Pitch in! Send your pledge of support! mailto:support@vwtype3.org