[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Steven Ayres writes: > Getting them properly retorqued is the > tricky bit for the home mechanic. Try very snug without the pipe extension, then put the pipe on and go another about 60 degrees, and always continue to the next cotter key hole (NEVER back up to align the cotter key). Even with the pipe, you will feel it getting tight in the last few degrees. Obviously, this is only an approximation, but torque wrenches that read greater than 200 ft/lbs have to be searched for. Tim Dapper ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe