[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Or, just get one of the step-up, (step-down??) studs. It has one end that is 8mm, and one that is 6mm, used for when the oil drain plate stud holes in the case are stripped. John La Francois '65 Notch S (Nub) '67 Beetle (Bailey) 98 Jetta (Wolfgang) http://www.geocities.com/lhva88/ Just get an extra cooler and drill out the opening. Wah-la. It now accepts the bigger stud. :-) Worked for me. Joe Plowick My Site: http://type3lvr.homestead.com > > > Russ Wolfe wrote: > > > That oil cooler stud was not that hard to replace. And if you are getting a > > new case, it will probably not have that stud installed. > > No, but the new cases are threaded for an 8 mm stud. This gives you a real > headache :-) > > PerL > 73 Variant L > > ------------------------------------------------------------------- > Pitch in! Send your pledge of support! mailto:support@vwtype3.org >