[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 22 Feb 2001, at 2:00, Per Lindgren wrote: > What I did was I got an M8 bolt in correct length, cut off the head and > milled it down to 6 mm by fastening it in the chuck on my powerdrill. Then > I used a new metal file, milled it down to 6 mm (@ 3000 rpm) and threaded > it to M6 threads. Before I threaded it, I cut it to proper length. I don't know where you buy them, but "step" studs exist. I don't know if this particular combination of sizes and length is available, however. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Pitch in! Send your pledge of support! mailto:support@vwtype3.org