[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Some one suggest tha where you drill in - not to use the thread tape, but also to use a brass fitting that has a flange and you can place an o-ring on the outside to reduce the chances of any oil leaks. I haven't installed mine - so don;t know if it would work - but souunds feasible - and would stop you overtightening the fitting which is the berg complaingt about the tape Regards Andrew Riley > Get a Gene Berg kit and install it when you get the engine rebuilt > (easiest > method). It comes with instructions on installing it with the engine in > the > car (loosely spoken ;) but you need an air compressor to pressurize the > case > and blow the shavings out when you drill into it. > ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe