[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Oscar, I have not been able to locate the lowering instuctions for the front and back but I recall reading in one article to cut a peice of cardboard to use as a before and after measuring tool . You should mark the initial measurement on it from a reference you choose perferably the main suspension frame. Each spline is 2 inch difference on the suspension (if I am wrong someone correct me) compare both arms with your homemade measure, they should be at the same position. I do not remember anymore about the article I have read. The autor was a little primitive with his measuring tools as you can see. Since you will perform the lowering this weekend I will not have time to dig through the mountain of boxed litereature in my basement and find the instructions, I have several articles. LEON MARTINEZ martinez@ftscpac.navy.mil 1969 SQUAREBACK EFI/AUTO SAN DIEGO AND TIJUANA ---------------------------------------------------------------------------- ---- this weekend I'm planning to lower my notchback, I only want to lower the car 1 or 2 inches. front and back , so if any of you guys have done this you're help will be greatly appreciated, also if you have any tips or suggestions on tire sizes let me know ( I'm putting 15x5 1/2. wheels)