[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

[T3] Vacuum Advance Question


<x-charset ISO-8859-1>Ok, after rechecking ignition stuff this weekend and replacing plug wires/points/etc (all checked out ok).

I still have the problem of hesitation and stalls when under load (when I let off the clutch pedal in gear).
It also is somewhat hard to start when cold, after about 5-7 tries when I floor the pedal it will start with a few small backfires and then idle ok with the aux air reg hose detached, rough with it attached. It will fire right up when I have let it run for a few minutes. Also I checked my fuel pressure while reving the motor and it stayed 29 psi.

Is this a symptom of my vacuum advance not working properly? I installed a used one I had laying around and it made no difference, but I don't think that one is any good either. I have yet to test the mechanical advance as I just read some info about that in the archives (thanks Greg!)

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/

</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]