[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>Hello, all. I have a set of alloy wheels that I'd like to mount on my car. The section on the alloy wheels where the head of the lug bolt seats is flat, rather that V-shaped like the stock steel wheels. Therefore, I cannot use the stock lug bolts with the alloy wheels. I'd like to find chrome lug bolts that have a flat "shoulder". I believe this is called a "mag seat". The size is 14mm with a 1.5 thread pitch. I am not certain of exact length I need, but I imagine I can get a longer bolt machined to a shorter total length if needed. Lastly, I realize that I can bolts studs into the brake drums and use lug nuts, but I'd rather use one-piece lug bolts so I can easily move these wheels to another car if needed (and quickly put the stock rims back on with ease). Any assistance is greatly appreciated; thanks very much for your help. - Todd ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/ </x-charset>