[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 27 Dec 2001, at 14:56, Steve Friedeck wrote: > To set the valves on a motor I'm putting together: I'm using the > line on the pully farthast to the left. Problem is sightng this > line up with the split in the case due to the fan being in the > line of sight. There is no 180 degree mark, what's an accurate way > to put one on there. You're doing the right thing. The actual position isn't critical because you're on the "flat" part of the cam. If you look a the pulley, you will see that there is a wide space next to the timing marks. Look for a similar space on the other side and use the same end of it that you used for #1 & 3. That's probably more precision than you need. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org