[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
--- chris schath <hoyschel@hotmail.com> wrote: > > > could do with a short tutorial on valve clearance > adjustment. Thanks in > advance. -Chris > > > Valve adjustment, with the dist pointing to #1, timing mark on pulley to "0" adjust #1 valves to .006 I&E,turn the engine so that the dist rotor turns counterclockwise 90 degrees this will be #2,timing pulley should be at bottom dead center, adjust #2 valves to .006,turn engine to "0" on timing pulley,with dist still turning counterclockwise this will be #3 adjust valves to .006. continue turning dist counterclockwise untill timing pulley is again at bottom dead center this will be #4, rotor should point to #4 on dist, adjust valves for #4 .006, put valve covers on thats all. Phil _______________________________________________________________ > Chat with friends online, try MSN Messenger: > http://messenger.msn.com > > ------------------------------------------------------------------- > Too much? Digest! mailto:type3-d-request@vwtype3.org > Subj=subscribe > __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com