[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>Do they sell pan halves like for beetles that can replace the rust but keep the VIN and not affect the rear torsion? -----Original Message----- From: Jim Adney [mailto:jadney@vwtype3.org] Sent: Tuesday, December 18, 2001 12:32 PM To: type3@vwtype3.org Subject: Re: [T3] Floorpan Help On 18 Dec 2001, at 12:26, Krash400@aol.com wrote: > Problem: I need to replace some of my driver side floor pan on a 65 > notch, and a couple of people have told me that notchback, fastback, > and squareback have pretty much the same floor pan,,,,,,is this true > that all T3s will be close to interchanging I would expect any T3 except for the T34 to interchange, especially if you stick to the swing-axle years: 61-68. You could swap in a later IRS pan and rear subframe with some extra effort, but there are benefits to that, too. Note that swapping pans also means changing your VIN, since the "official" VIN is on top of the tunnel. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe </x-charset>