[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 11 Dec 2001, at 13:56, James Ramsay wrote: > I am trying to check out my FI system to see that all components are running > properly - I want to check out the injectors to see they are issuing a fine mist > rather than a dribble. > > What is the best way - unbolt injectors and turn engine over with the coil > unplugged? The BEST way is to do this with a FI tester which will allow you to run each injector in turn. Since you probably don't have the tester, you can probably make do by just unplugging all the injectors except for the one that you're looking at at that moment, then work your way thru each of them. If you still have your original Bosch injectors, the spray pattern is seldom a problem, so this would be the absolute last thing I would check. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/