[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sun, 9 Dec 2001 15:21:37 -0600, Jim Adney wrote: >On 9 Dec 2001, at 11:50, JASON CORNFELD wrote: > >> My Washer switch leaks under the dash... it only drips from there. i >> do not have these little sleeves you are talking about. > >I think you have the inlet and outlet switched and you really need >those extra sleeves. Dig them out of your trash and put them back >on. If you don't have them, make some out of slightly larger >diameter tubing. I just got a 12 volt pump at a liquidator (I have no idea what it was originaly for) and made mine electric. I drilled out the back of the original washer switch and glued a small momentary pushbutton switch there and use the plunger from the original switch to operate that. And everything still looks original. I also used small wire ties instead of the little sleves. Mark Healey 71 FI auto square 71 FI manual square marksvw@healeyonline.com ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe