Re: [T3] Synchronizing carbs

[JaransonT3@aol.com]

I used a 2" Pipe Nipple that was 3 inches long.  It was a couple of bucks in 
the plumbing department at the local Home Depot and worked perfect.  It was 
the right height and diameter (for the stock 32 PDSITs anyway).  It was heavy 
enough that you could set it on the carb without it vibrating or bouncing off 
and you did not have to worry about crushing it while you held it down onto 
the carb.

Later,
John Jaranson
'71 FI Auto Fasty (Jane)
'66 Square (???)
About half a Late Square (organ donor)
http://hometown.aol.com/jaransonT3

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe