[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Heather, the fastback only gets the ONE seal per side. It has 4 little studs that go thru the weld seam in their reseceptive holes, then the nuts go on those studs to anchor the seal. The seal goes over that lip and hides the lip. There are 4 black metal caps per window that act as a bending point for the glass (rubber stiffeners). And the screws for the latch are larger than a bug popout. The easiest way to install them is with a helper, and partially assembled window-seal combination, start by geting the seal started, then chase the studs in place, then the nuts for the studs, then finish the seal, then attach the latch. I hope this helps you out. Bob 65 Notch S w/ sunroof & Sue 70 Fasty w/ popouts currently open to let in the air. P.S. Only the Notch & Square use the outer seal with pinch welt combination. ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe