[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] Brake pushrod

To: Type 3 Mailing list <type3@vwtype3.org>
Subject: Re: [T3] Brake pushrod
From: Henrik Larsson <notchback@home.se>
Date: Sat, 11 Aug 2001 10:00:17 +0200
References: <3B7461B5.1654.FCCE5F@localhost>
Resent-date: Sat, 11 Aug 2001 04:00:43 -0400
Resent-from: type3@vwtype3.org
Resent-message-id: <"46hR9.A.TwG.pYOd7"@client4.hv-ywh.com>
Resent-sender: type3-request@vwtype3.org

Jim Adney wrote:

> I'd be interested to know how yours turns out after you use the
> template to adjust it.

I didn't measure the length of my push rod, because the manual said that the push
rod should be adjusted in the car. I used the template to adjust the pedal stop
bracket and when it was done, I had 1 mm push rod clearance. It seems like the PO
only "adjusted" the pedal stop bracket.

Henrik Larsson, Sweden
1964 and 1968 Notches

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/

References:
- Re: [T3] Brake pushrod
  - From: "Jim Adney" <jadney@vwtype3.org>

Prev by Date: Re: Fwd: Re: [T3] too much mind time
Next by Date: Re: [T3] NOS Type 3 exhaust
Previous by thread: Re: [T3] Brake pushrod
Next by thread: Re: [T3] Brake pushrod
Index(es):
- Date
- Thread