[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] Can't get the point gap right

To: marksvw@healeyonline.com, type3@vwtype3.org
Subject: Re: [T3] Can't get the point gap right
From: I4VW@aol.com
Date: Fri, 10 Aug 2001 22:02:32 EDT
Resent-date: Fri, 10 Aug 2001 22:03:23 -0400
Resent-from: type3@vwtype3.org
Resent-message-id: <"YPxCpC.A.OMC.pJJd7"@client4.hv-ywh.com>
Resent-sender: type3-request@vwtype3.org

In a message dated 8/10/01 8:00:37 PM Eastern Daylight Time, 
marksvw@healeyonline.com writes:

> On my 8 cyl meter it always reads about 20 degrees.  
-------------
If yours is like mine, you'll have to compensate on the 8 cyl reading & 
divide in half.
Of course you'll want to use your feeler gauge & set them at .016 then attach 
the dwell meter.

Tom

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/

Prev by Date: Re: [T3] Can't get the point gap right
Next by Date: Re: [T3] Can't get the point gap right
Previous by thread: Re: [T3] Can't get the point gap right
Next by thread: [T3] body work question
Index(es):
- Date
- Thread