[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Cold Start Valve on a 72 fi square




> On 25 Apr 2001, at 20:00, dubdriver wrote:
>
> > your starter solenoid is wired wrong.
>
>> There was nothing in his symptoms that struck me as leading to
> >this conclusion. In fact I doubt if his problem has anything at all to
>> do with the CSV.
>
> -
> *******************************
> Jim Adney, jadney@vwtype3.org
> Madison, Wisconsin, USA
> *******************************

I've had this same problem.  The pump will not build any pressure while
cranking, thus no start or very difficult starting.  I found the wire push
on wire connector loose and it corrected the problem.  I think in his
orignial post, he stated he had just returned the engine to it's original
state (FI).  It's likely that this wire was removed along with the rest of
the FI by the previous owner


> Search old messages on the Web!  Visit http://www.vwtype3.org/list/
>

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]