[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 4 Apr 2001, at 20:23, James R Jinks Jr wrote: > does anyone have a good working knowledge of what processes are > used to make urethane products (mountings, bushings, etc.) and if > it is possible obtain and use supplies individually. Call around to some industrial supply houses and see if you can find someone who carries the Devcon line of products. They make a number of 2-part polyurethanes under the trade name Flexane that are suitable for lots of things. They are made in a range of durometers, so you can pick what you need, and they can even be mixed if you need something in between. You should also be able to find info on them on the web. The stuff is NOT cheap, but it is available in small quantities and the quality is excellent. I have used it. If you need it to bond to metal, there are special instructions and a primer for that. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/