Re: [T3] Berg 13 Im getting Crabby...

["Herman Haustein" <haustein@netvision.net.il>]

The black knob screw is the mixture screw , every time you adjust the idle
screw , you have to re-adjust the mixture screw :
For starters turn it in till it stops and then out one and a half turns .
Every time you mess with the idle : turn the screw in till the rpm's drop ,
turn it back out till it levels and give it a little more out.
>From then on monitor your mixture through the heat of the manifolds and pull
the plugs now and again.

You don't know what your in for.
Herman
----- Original Message -----
From: Park, Keith J (CRD) <parkkj@crd.ge.com>
To: <type3@vwtype3.org>
Sent: יום שני 25 ספטמבר 2000 20:35
Subject: [T3] Berg 13 Im getting Crabby...


> Question to the carb folks.. Exactly what does that air correction screw
(with the black cap) do???
> I havent noodled with the setup on it yet.
>
> Keith
>
> Electronic Technician
> Packaging and Reliability Program
> GE Corporate Research & Development
> Bldg KW Room C1641
> PO Box 8 Schenectady NY 12301
>
> (518) 387-5104  Fx  (518)387-5442
> parkkj@crd.ge.com
>
> -------------------------------------------------------------------
> Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe
>
>