[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] Loose Lower Heat Exchanger

To: <type3@vwtype3.org>
Subject: Re: [T3] Loose Lower Heat Exchanger
From: "Jim Adney" <jadney@vwtype3.org>
Date: Tue, 19 Sep 2000 08:36:35 -0500
In-reply-to: <000f01c021f4$3113ec60$61320018@sttln1.wa.home.com>
Priority: normal
Reply-to: jadney@vwtype3.org
Resent-date: Tue, 19 Sep 2000 09:26:40 -0400
Resent-from: type3@vwtype3.org
Resent-message-id: <"QQA3U3.0.xk6.9csnv"@maria.yourwebhost.com>
Resent-sender: type3-request@vwtype3.org

On 18 Sep 2000, at 21:43, Nathan Jacobsen wrote:

> Make sure the outer casing is secured to the cooling tin under the
> push rod tubes, and then use some red heat resistant silicone to seal
> between the casing and the rest of the heat exchanger.

Will the red silicone really stand up to the temp of the exhaust pipe 
itself? If so, this could be really useful.

-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe

Follow-Ups:
- Re: [T3] Loose Lower Heat Exchanger
  - From: "Nathan Jacobsen" <jacobsen4@home.com>
- Re: [T3] Loose Lower Heat Exchanger
  - From: "Keith Park" <TopNotchResto@worldnet.att.net>

References:
- Re: [T3] Loose Lower Heat Exchanger
  - From: "Nathan Jacobsen" <jacobsen4@home.com>

Prev by Date: [T3] Las Vegas Bug-In
Next by Date: SV: [T3] speaker panels
Previous by thread: Re: [T3] Loose Lower Heat Exchanger
Next by thread: Re: [T3] Loose Lower Heat Exchanger
Index(es):
- Date
- Thread