[T3] New to it all!

[Greg Irick <gregi@vwtype3.org>]

Brian, there is a wide five (5x205mm) disc brake kit from Rocky Mountain 
Motorworks that will fit a '68 and later Ghia that,correct me if I am wrong 
guys and all of you dark siders, I think will also fit a Type 
3.  Unfortunately it is quite pricey at $995.00 but you could buy the kit 
with the CB Performance drop spindles, sell them to some B#g owner and 
defray a little of the cost.  The 5 lug pattern on your drums/discs is 
probably a Porsche pattern that will fit the 5 lug Fuchs alloys which also 
have quite a bit of backspacing so they might fit and not rub.  The only 
way to find out is to make sure that the pattern really is the Porsche 
pattern and then see if there is room when you fit it up.  5 lug Porsche 
wheels are pricey in and of themselves so either way you will be paying out 
some bucks.  Good luck


Greg Irick
Silverdale, WA
gregi@vwtype3.org
gregandjenn@earthlink.net


'65 Notchback on a '69 pan with Britax sliding rag.  Soon to have original 
door handles and trim.  Plans for a 1776cc motor with a Berg 5-speed, 4 
wheel disc brakes with Porsche 2 Liter alloys, Ruby Red paint and original 
interior.

'73 Pro Street Bug w/1915cc CB Perf. engine, Ultra Competition FI, Super 
Street tranny, Weld Racing Wheels with 195 50 15's in front and 265 50 15's 
in back with Type3 rear drums.


-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org