RE: [T3] lowering stiffness

["Erkson, Toby" <toby.erkson@intel.com>]

I adjusted the front suspension on my Squareback two notches on the outer
splines and created a nice drop.  I can't imagine seven, no way!  The pan
would be in the ground!!  If you did seven then you must of turned the
inners in the opposite direction, right?

   Toby Erkson
   air_cooled_nut@pobox.com  <-- Please use this address for email
   '72 VW Squareback 1.6L bored and stroked to 2.0L, Berg five-speed
   '95 VW Jetta III GL 2.0L, P-Chipped, Jamex sport suspension
   Portland, Oregon, http://www.icbm.org/

>-----Original Message-----
>> 7 Notches... I LOVE this!
>>
>> 1 Notch is about 12 degrees.. so 7 is about 90deg... it would be
physically
>> impossible to reinstall the suspension if it were anywhere near that!
>
>Think what you want, I turned it 7 notches and re-installed it.
>It wasn't easy as I remember, but we got it on there. Can't remember if it
>was the inside or outside of the torsion bar, but it wouldn't change it
much
>either way.

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe