Re: [T3]Removal of popout rubber

[BOB2TYPE3S@aol.com]

There are 4 ,7mm nuts on the inside of the rubber seal on the fastback. They 
also use a 1 piece seal .From inside the car locate the 4 nuts and remove 
them FIRST then with a helper ,remove the screws fo the latch.Then slowly 
work the inside rubber lip out  with helper to catch the glass and seal 
together (as a unit).Then you can do the other side.
Bob 70 Fasty AT with working popouts again.

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe