RE: [T3] Haltech or equivalent

["Erkson, Toby" <toby.erkson@intel.com> (by way of Greg Merritt)]

For starters budget $1000 minimum and be ready to spend a little more.  I
would also recommend you allow yourself a couple months of build time if
it's a weekend-only work because there's always SOMETHING that will go wrong
and you'll have to wait for a part or fix it :)  Here are some links that
I've accumulated in my studies:
http://www.wolfems.com.au/index.htm
http://www.turbofast.com.au/autronic/autronic.html
http://www.dalhems.com/
http://efi332.eng.ohio-state.edu/diy_efi/
http://www.obr.dk/default.htm
http://www.electromotive-inc.com/
http://home.swbell.net/nitro57/EFI.HTM
http://www.gems.co.uk/
http://www.haltech.com.au/
http://www.motec.com/home.htm
http://www.sdsefi.com/
http://www.cbperformance.com/  <-- too spendy IMO but 'tuned' for VWs
Good luck!
   Toby Erkson
   air_cooled_nut@pobox.com  <-- Please use this address for email
   '72 VW Squareback 1.6L bored and stroked to 2.0L, Berg five-speed
   '95 VW Jetta III GL 2.0L, P-Chipped, Jamex sport suspension
   Portland, Oregon, http://www.icbm.org/

>-----Original Message-----
>My biggest concern is cost--anyone have a good ballpark
>figure? Or, better
>yet, does anyone know who sells them at a reasonable price?  What other
>companies make PEFI?


-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe