Re: [T3] Rear hatch seal

["Nico teWinkel" <ntewinkel@yahoo.com>]

We got ours for the Fastback from Bowwow (the Canadian one).
They were roughly $60 Canadian ( is about 40 USD ) each.
I'm pretty sure they also have the squareback seal. For the Fasty, front and
back seals were the same. They had to be cut to size - run it around the
hole, and cut the left over piece off the end, nothing fancy.
The seals fit nicely and look good. It's only been a few weeks, so I can't
give a long term forecast on durability.
We used some clothespins to hold the seals down while the glue was drying -
that was only necessary for the corners that tried to lift up a little. As
for glue, we used "Household Goop" - a rubbery all purpose glue that dries
clear. Seems to work well.

Cheers,
-Nico

-----Original Message-----
From: Brian Langhans <brianpl@whidbey.com>
To: type3@vwtype3.org <type3@vwtype3.org>
Date: Thursday, March 23, 2000 8:56 AM
Subject: [T3] Rear hatch seal


>Can anyone tell me where I can order a rear hatch seal for a 73 squareback?
>Plus the front trunk seal , might as well do both.
>Thanks
>
>-------------------------------------------------------------------
>Search old messages on the Web!  Visit http://www.vwtype3.org/list/
>