[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] isolator blocks

To: "A VW club!" <type3@vwtype3.org>
Subject: Re: [T3] isolator blocks
From: "Jim Adney" <jadney@vwtype3.org>
Date: Wed, 22 Mar 2000 09:45:45 -0600
In-reply-to: <38D8E307.FCD62692@micron.net>
Priority: normal
Reply-to: jadney@vwtype3.org
Resent-date: Wed, 22 Mar 2000 10:42:59 -0500
Resent-from: type3@vwtype3.org
Resent-message-id: <"HEXmX1.0.Dk4.0eEsu"@maria.yourwebhost.com>
Resent-sender: type3-request@vwtype3.org

On 22 Mar 00, at 8:13, Brian wrote:

> They serve two purposes...one is the thermo barrier and the second is
> to limit vibration from foaming the fuel before it goes into the
> camber for igniting....Weber/Dellorto have been doing this for years

The anti-foaming is a red herring. There can be no vibration 
isolation with the 2 studs holding the 2 parts rigidly together.

-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe

References:
- Re: [T3] isolator blocks
  - From: Brian <vwfye@micron.net>

Prev by Date: RE: [T3] rust
Next by Date: Re: [T3] Rust Survey Results! (sort of long)
Previous by thread: Re: [T3] isolator blocks
Next by thread: Re: [T3] isolator blocks
Index(es):
- Date
- Thread