RE: [T3] Doors

["Jake Kooser" <jake_k@attglobal.net>]

6mm hex?  My fastys have big philips head screws on them.  Two on each
hinge, with the backs exposed.  Might be different on the notches, I'll bow
to anyone's experience here.  I hosed the screws on mine down with WD-40
like they were on fire, and then used a manual impact driver and a BFH (Big
F***ing Hammer) to get them out.  You may want to consider taking a yoga
class first, 'cause it's real tricky to get a good angle to hold the impact
driver and hit it with the hammer at the same time.  Optional, I suppose,
would be a REAL trusting friend (who may not be for long!) to hold the
impact driver, or a friend who is REAL accurate with a hammer.

Jake Kooser
'71 Squareback (needs a good body shop in Fl.)
'73 Fastback (Silver Ghost, ala' J. Jaranson)
'71 Fastback (free to a good home!  Seriously)
'73 Not-Always-Super B**tle
Lauderhill, Florida



-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe