Re: [T3] My Berg Motor

[Stan Schaefer <stans4@ix.netcom.com>]

Most of the DP heads I've seen(OK, not lately), have at least had a
boss cast in where you could drill and tap, if so inclined, for the
sensor. Usually had two bosses, one for the sensor and one for the
later crankcase venting.  Are they OEM or aftermarket? 

I was talking about this very thing with another guy, he claimed there
was some sort of aftermarket bracket that you could clamp onto the
head fins and mount the sensor that way.  Didn't know anything about
interference with the cooling tin(probably didn't know what he was
talking about, anyway.).  Wouldn't be too hard to rig up some sort of
bracket that's tapped for the sensor and fasten it on the head.
Wouldn't be stock, but as long as the ground is there, the control box
should be happy.

There's always one more part you need when building these things, I
swear.

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe