Re: [T3] Door window & trim removal

["Jim Adney" <jadney@vwtype3.org>]

On 8 Mar 00, at 13:39, Dauns, Frank wrote:

> I am currently trying to figure out what I need to do to remove the main and
> vent windows, felt channel, scrapers, and associated trim from the door of a
> 68 Square.  
> 
> There is a piece of chrome that houses the felt channel just behind the vent
> window that has a screw on the top of the door just under the door seal.
> There also appears to be two bolts on the inside of the door under the
> interior panel which also secure this piece.

IIRC, First remove the bolt that secures the bottom of the REAR 
window channel, then remove the glass and the window winder.

Remove the inside bottom glass rubber scraper.

Remove the top and rear felt channel and rear lower steel channel.

Remove the front felt/steel channel together with the vent window.

VERY CAREFULLY remove the window trim and outside scraper 
after removing the clips that hold it in place.

The front channel with the vent comes out somewhat in the middle 
of this process. This is a rather long involved process that requires 
care and patience to avoid scratching or bending things that matter.

Good luck.

-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/