FW: [T3] Porsche Talbot Mirror on Fasty

[Stieg Hedlund <SHedlund@blizzard.com>]

> Yeah I do.
> 
> I found that it was best to mount it on the fender, since it was hard to
> adjust it far enough so it would work on the door. You can get all the
> hardware from Aardvark International at http://www.cibie.net/ , other
> replacement part are also available there. Get someone to hold it where
> you're going to put it and see if you'll be able to see or not.
> 
> There are various ways you can mount it, but I used the U-shaped bolt
> which you drill two holes for, push through from the inside, put the
> gasket, base, and cone pieces on and put two nuts and washers on inside
> the cone. Then the bezel gasket and mirror bezel attach to the adjusting
> screw on the front.
> 
> It's pretty easy and looks cool.
> 
> Good Luck,
> 
> Stieg Hedlund
> 
> -----Original Message-----
> From:	JGGullion@aol.com [SMTP:JGGullion@aol.com]
> Sent:	Wednesday, March 08, 2000 1:30 PM
> To:	type3@vwtype3.org
> Subject:	[T3] Porsche Talbot Mirror on Fasty
> 
> Hey all,
> 
> Does anyone have a Porsche Talbot exterior mirror on their type III?  How
> did 
> you go about attaching it if so.  Thanks.
> 
> Greg
> 
> 63 Notch
> 63 Notch
> 69 Fasty
> 95 GOLF III SPORT 
> 
> -------------------------------------------------------------------
> Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe