Re: cooler seal Poll

[Per Lindgren <lindgre@online.no>]

Jim Adney wrote:

> Does your cooler have the ~3mm protrusions underneath around
> each of the three mounting holes?

Those protrusions are not as high as 3 mms on my cooler! They are more like >1
mm on the two bolts, and ~1,5 mm on the third towards the center line. These
protrusions are guides set through the housing, probably to avoid crushing the
cooler when tightening the nuts. At least that's what they look like to me.

PerL
73 Variant L

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe