At 08:54 PM 6/24/00 -0400, you wrote:
I'm thinking of getting a set of CB Performance 044 Magnum heads with the 40x35.5 valves. Has anyone used these? They will be going on a 1776cc with stock internals (although has a counterweighted crank) and dual Weber 34 ICT's. Will these heads be too big for a stock cam and the carbs? I plan on getting Weber 40 IDF or DCNF carbs down the road and a Engle 110 cam.
The Weber 34's will not do well with larger than stock valve size. The 40's may work reasonably well if properly jetted, but the big problem you are going to run into is exhaust, especially the stock heater boxes which will likely provide too much restriction.
Nathan ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe