[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] Generator Belt Advice

Aaah, that would explain the number of shims I had to move!
Just to make sure - the pulley shouldn't slide under the belt when you turn
it by hand, right? (engine off, of course!) I had a nasty bit of slippage
happen until I tightened it up to that point.

Thanks,
-Nico

----- Original Message -----
From: Dave Hall <dave@hallvw.clara.net>
To: Type 3 List <type3@vwtype3.org>
Sent: Thursday, June 22, 2000 10:36 AM
Subject: Re: [T3] Generator Belt Advice


> >Make sure you get a 10x1000 belt
>
> The proper size is actually 9.5 x 1000, so a 10 x 1000 may ride a bit
higher
> up the pulley.
>
> Dave.
> UK VW Type 3 & 4 Club
> http://www.hallvw.clara.co.uk/
> ------
>
> -------------------------------------------------------------------
> Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe
>


__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com