RE: [T3] torsion bar adjustment.

[Russell Wolfe <russella@netins.net>]

It is shown it the Bentley manual, under the sections for front and rear
torsion bar adjustments. It is a machined plate, with a rotating inner section,
with 2 levels in it, and a degree scale around the outside.



On Mon, 12 Jun 2000, you wrote:
> a 3 month sea voyage no doubt ??
> 
> still got to ask - but what does it look like - could i make one?  don't
> know of any body down here with one
> 
> cheers
> andrew
> 
> > -----Original Message-----
> > From:	Russell Wolfe [SMTP:russella@netins.net]
> > Sent:	Wednesday, June 14, 2000 12:49 AM
> > To:	Andrew Riley
> > Subject:	RE: [T3] torsion bar adjustment.
> > 
> > On Mon, 12 Jun 2000, you wrote:
> > > Lend it to NZ
> > > 
> > > Just kidding
> > If you will pay my exspenses to deliver it, I will gladly bring it to you.
> > 
> > --
> > Russ Wolfe
> > http://www.wolfenet.net
> > 
> > 
> > 
> > > 
> > > > -----Original Message-----
> > > > From:	Russell Wolfe [SMTP:russella@netins.net]
> > > > Sent:	Wednesday, June 14, 2000 12:37 AM
> > > > To:	type3@vwtype3.org
> > > > Subject:	[T3] torsion bar adjustment.
> > > > 
> > > > I have now in my posession, a VW261 torsion bar adjustment gage. I am
> > > > trying to
> > > > deal with the current owner to acquire it permenently. I have a pair
> > of
> > > > Type 3
> > > > heads that he wants. :) If I can get it, I will be willing to loan it
> > out
> > > > with
> > > > a deposit to assure that I get it back. This is after I get my front
> > and
> > > > rear
> > > > bars set.
> > > > --
> > > > Russ Wolfe 
> > > > http://www.wolfenet.net
> > > > 
> > > > -------------------------------------------------------------------
> > > > Pitch in!  Send your pledge of support!  mailto:support@vwtype3.org
--
Russ Wolfe
http://www.wolfenet.net