Re: [T3] low pitched rattle

["Dave Hall" <dave@hallvw.clara.co.uk>]

> This (clutch operating lever) return spring is cheap and can be replaced
rather easily.

If you can get the arm off the shaft it's easy, but they are often pretty
tight/seized.  I seem to remember it was no trouble with the gearbox out
because you can move the whole shaft out a bit to give room to manouevre
the spring onto it, but I thought otherwise you have to remove the arm,
which needs a puller.  Maybe I'm mistaken, or maybe having the box out
meant I didn't bother to try a lever on the spring to force it over the
boss.

Dave.
UK VW Type 3&4 Club
http://www.hallvw.clara.net/
---




-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe