Re: [T3] Rear Suspension Question

[Steven Ayres <comwest@well.com>]

=> the rear camber is visibly wrong.  ... The Bentley manual suggests 
=> that this is adjustable via the spring plates, but it does not 
=> indicate at what point adjustment is not an option, and replacement of 
=> torsion bars is necessary.  

This concern implies you have a swing-axle rear, but please correct me 
if I'm misinterpreting. With swing axle it's more a matter of correct 
ride height than camber per se, and if your bars are sagging you can 
just tighten them up a notch or two. Fine camber adjustment in the rear 
is done with shims, although I'm not sure it can make much difference 
since every change in load alters camber. 

Steven Ayres, Prescott AZ
'66 343

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe