Re: RE: [T3] T4 motor in T3!!!

[My65notch@aol.com]

<<  at is discussed is the 2.3 kit from 
Mark Stephens.  At $2695, you get a kit using 96mm pistons and 78.4 crank, 
that will apparently get 125 to 130 hp  >>

hmmmmm.. this sounds high. I got the same kit from Stephens for around 1800 
bucks.
Trust me no cutting needs to be done a type4 motor fits in fine ( with bus 
tin ) you need to find some shorty manifolds to keep the carbs under the 
decklid ( if you want ) also if you want to use the stock rear bus hanger you 
need to do some fabbing. Check out my website for pix of a 914/type4 motor 
install into my notch.

Dan

65 Notch ( with Type4 POWER )
65 Bug
my65notch@aol.com
http://users.aol.com/my65notch/index.htm

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org