Re: [T3] MT rebuild

["Jim Adney" <jadney@vwtype3.org>]

On 23 Dec 2000, at 20:33, Herman Haustein wrote:

> Thanks for all the info, sounds like if I can stay away from the Diff
> I only need to worry about the syncro's and shift forks, and maybe a
> few bearings. About adjusting the shift forks can it be done without
> the fixture ? I have feeler gauges , a torque wrench and a digital
> verinier caliper (up to 0.01mm) which I hope will see me through. I
> could also get access to a press if needed. - would it be necessary ?

The press shouldn't be necessary, but you will still need a fixture, 
or an old case you can cut up, to adjust the shift forks "in place."

-
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe