RE: [T3] Mounting the full flow filter

["Erkson, Toby" <toby.erkson@intel.com>]

http://www.icbm.org/erkson/ttt/engine/full_flow_oil_system/full_flow.htm
Mount vertically for less mess and ease of changing.  Don't do what I see
MANY others do, especially the Type I crowd, and mount the filter inside the
left rear wheel well.  If you do then at least put a rock guard in front of
it.

   Toby Erkson
   air_cooled_nut@pobox.com  <-- Please use this address for email
   '72 VW Squareback 1.6L bored and stroked to 2.0L, Berg five-speed
   '95 VW Jetta III GL 2.0L, P-Chipped, Jamex sport suspension
   Portland, Oregon, http://www.icbm.org/

>-----Original Message-----
>Dont know where the filter will go... the hoses are rather short
...
>Opinions here... Where should I mount the Berg Filter???

-------------------------------------------------------------------
Pitch in!  Send your pledge of support!  mailto:support@vwtype3.org