Re: [T3] New questions and comments

["shackedup" <shackedup@home.com>]

Anywhere on the rear frame head is good for the jackstands.  Follow the
torsion bar ends inwards and you'll see what I mean.  Good luck with the
starter.  If you pull your rear engine tin towards the back of the car (on
the pass side) a bit you can get a wrench on the upper starter bolt without
getting under the car.  You'll have to get underneath for the other bolt, of
course.  Also, it is obvious, but wear eye protection and gloves when your
doing this sort of thing.  Everybody knows this but sometimes I forget and
crawl out with bleeding knuckles and rusty crud in my eyes.....

Andre

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe