[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 9 Nov 99, at 19:27, Herman Haustein wrote:
> my brother is considering buying a B*G (T1) and I wanted to know if it
> is possible to transfer a disc break from a old T3 front I have , a '72.
He will need Karmann Ghia type 1 disk steering knuckles; early
type 3 calipers will fit these, but have 42mm pistons instead of 40
for the K-G.
> Also , what is involved in going to 1600 from 1300 only piston/cylinders?
I THINK you only have to machine out the holes in the heads, but
you may have to machine both the heads and the case.
Jim
-
Jim Adney jadney@vwtype3.org
Madison WI USA
-------------------------------------------------------------------
Search old messages on the Web! Visit http://www.vwtype3.org/list/