[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Yes, I am the owner of the "rare as hen's teeth" 86mm First Oversize OE Koblenshmidt cylinders - don't ask where I found rings ! About the shims I measured them with a Digital Caliper - my latest buy - accurate up to a hundredth of a millimeter . -----Original Message----- From: Per Lindgren <lindgre@online.no> To: type3 <type3@vwtype3.org> Date: 26 ֏ 1999 10:43 Subject: Re: [T3] Overhaul update >> Engine is a 1603cc, yes there is such a thing, > >86 mm cylinders? > >> CR is 7.8:1 > >Good. > >> 2. Couldn't find the right size shims for adjusting crankshaft end play, so >> I used FOUR shims and play is 0.10 mm. Is this O.K. , from your experience ? > >I had 8 or 10 different shims, so I used a some hours to set the end play >correctly. Just removal, refitting etc. > >PerL >73 Variant L > >------------------------------------------------------------------- >Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe > >