[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
OR drill two holes on opposite sides of the hook and arm and use some safety wire to hold the cable in place while you attach the rear. No bear needed. I had to figure this one out on Jan 17th in 1 foot of snow outside. A case of beer couldn't coheres friends outside to help. 8*) Thank You, Jason Renville Jrenville@wafertech.com >When replacing cable the big trick is to keep the front end on the pedal. >cluster without the pedal falling back and cable falling off. Tie a bungie >cord to the back end of the cable and to the rear of the car. Then you can >keep a little tension on the cable as the pedal cluster goes back in. It's >OK to substitute a friend and two beers for the bungie. ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe