Re: [T3] Fuel Sending Unit...

I remember seeing a 6V on My Notches original too.

Keith

----------
> From: John M. Kowalski <john.kowalski@zg.tel.hr>
> To: Jim Adney <jadney@vwtype3.org>; type3@vwtype3.org
> Subject: Re: [T3] Fuel Sending Unit...
> Date: Sunday, March 21, 1999 9:47 AM
> 
> 
> >There is only 1 type 3 tank sender unit; there is no 6/12V variation. 
> >You can use any type 3 tank sender unit.
> >
> >Jim
> >-
> 
> 
> Jim,
> 
> Are you positive?  I distinctly remember needing to change my old sending
> unit (said "6v" on it) to a "12v" unit to complete the 6v to 12v
> transition.  Until I did this, the needle was pegged on full.  After I
> installed the 12v unit, everthing was fine.  The  PO already had replaced
> the 6v cluster with a 12v cluster.  
> 
> I could be wrong, but that is how I remember it.
> 
> Take care,
> 
> John
> 
> Zagreb, Croatia
> 
> -------------------------------------------------------------------
> List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org