[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> Anyone got a Type 3 fuel-pump push-rod to measure? Since my engine is still torn down (due to 2 jobs and lack of fundage - I know, seems an oxymoron), I just measured mine with a highly accurate tape measure. Came to approx. 11.75 cm. I am guessing that that should tell you whether yours is even close Jake. Hope this helps. BTW, all parts gathered. The lack of fundage reared it's ugly head when I had to buy a cam (of course), new P/C's, a reground crank, new lifters and had the heads done (lapped/seated, new seals). Next step - clean and assemble! :)) -- Justin C-ya@tmgbbs.com http://tmgbbs.com/cya '95 CBR9 FeRRari red (now) w/ '93 bodywork '71 VW Squareback -- Justin C-ya@tmgbbs.com http://tmgL4O·cya '95 CBR9 FeRRari red (now) w/ '93 bodywork '71 VW Squareback ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe