Re: Oil Cooler: Type 3 Engine

[Per Lindgren <lindgre@online.no>]

Steven Ayres wrote:

> DJ=> You can use any type 1 oil cooler.
>
> Sorry, no, wrong. T1 coolers are completely different, and the T3 does not
> put anything between the case and the cooler but the seals. If you have
> an adapted T1 cooler on your T3, you have a cooling problem that can be
> easily resolved with the right part.

I put a T1 cooler in my Square to try to find a low pressure malfunction. I
had no problem neither before or after the T3->T1 cooler swap. I have a
uuӴ replacement case, so I put the pressure sensor in the T1 location
beneath the distributor (I used a 90 degree adapter to make it fit)

PerL
73 Square

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/