[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Flexible Metal Heat Ducts


aedan mcghie wrote:

> I was wondering about using heating ducting so if you could measure up the
> originals that would help a lot! Thanx.

60mm inner diameter, and ~ 18-22 cm in length, depending on how
compressed/stretched-out they are.  The ones for beetles are the same
diameter, but too long.  The only other 60mm hose I can think of off
hand that
might work is the hose that runs from the auxiliary heat fan to the heat
exchangers on the 72-79 bus (211 261 236A  $3.75 for 53 cm from RMMW).   It's
the flexible paper stuff, and would probably have to be replaced periodically
(the length of the period in question being the main issue/question).

Eric Forsman
Baltimore, MD


-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]