[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
You can use steel washers for this. They should fit over the snout of the bowden tube that fits into the bracket that bolts to the transmission case. Quarter inch ID would not likely be big enough. <<<<<<<<<<<<<<< Nathan Jacobsen '62 NB '69 SB M/T ICQ #38633286 >>>>>>>>>>>>>>> > Forgive the ignorance, but what exactly do they mean when they say > "spacers" to put between the clutch arm and the clutch tube? Can I just > use steel washers? Theres a spacer already there, but its a cylindrical > piece of metal about 1/2" and it looks like it has an i.d. of about 3/8" > does the spacer I need have to be the same dimension? Or does the spacer > only go over the clutch CABLE, thus making it ok to use a washer with a > 1/4" i.d? > I like to know EXACTLY what I need before starting any work, so any help > would be appreciated. There's nothing worse than being in the middle of > a job and realizing you have the wrong part. > ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe