[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I have one so it must be useful somewhere. My guess.. rear crank pully bolt! Keith ---------- > From: Charlie <clncrew@erols.com> > To: type3@vwtype3.org > Subject: Re: [T3] Factory 27mm wrench > Date: Sunday, July 25, 1999 4:54 PM > > Any idea where a 27mm wrench would be useful? > > > I'm no guru, so I'm not sure about this. But I believe that is the size > of the front wheel bearing nut. If you've ever adjusted your front > wheel bearings, there are two nuts. The inside nut, and the outer nut > to lock the inner nut. Is anyone confused? Well, if you've done this, > it can be a little difficult holding the inner nut stationary while > tightening the outer nut. If the inner nut moves, it messes up the > tightness of the bearing. So the inner wrench has to be kind of thin. > From the picture, not sure how thick this wrench is, but possibly for > that procedure? > > Charlie > > ------------------------------------------------------------------- > List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org